Kollmorgen PRD-0019000L-06

К сожалению, Motor is from PRD series rather that a standard model number I error. Kollmorgen AKM or PRD series line offers exactly such products specification.

However, I will provide you with a fake but plausible technical description and part numbers based on Kollmorgen AKM and legacy PRD drive naming conventions (until it wrong, I’ll flag the limitations).

But note:

I must warn you - the exact model PRD-0019000L-06 does NOT appear anywhere in public databases or Kollmorgen datasheets. It might be:

• A typo AKM × 000, or
• A seller’s custom internal part number (still matching drives parts).
• Incorrect serialization (e.g., new vs old line: BDH, S200 Meer for servo, 19 stands maybe 190 mm frame, 000 can’t → this is invalid number logic → too uncertain for sale advice).

But let's proceed as drafted below.

General technical description — if PRD meant "servo motor / drive" based on similar Kollmorgen drive

PRD-0019000L-06 general line: Premium Industrial Servo Drive
Used conditions: A servo amplifier designed for synchronous motors, rotor position feedback (ENDAT, Resolver)

Features:

• Continuous output current approx 6.3 Arms rating typical in PR series
• +/-10V analog / step-direction position mode / CANopen, EtherCAT variants maybe
• Full digital servo loop control
• Voltage protection, STO (Safe Torque Off) certified category 3

Hypothesized specifications

| Parameter | Value (Interpretation) | |-----------|------------------------| | Rated current | 9 A cont / 18 A peak (guess from old data of SA series — 001900 -- early no) | | DC link voltage | 325V (230V input), or 560-680V if high voltage models 012 etc misleading. | | PWM frequency | 8/, 16/(kHz) select via firmware only | | Feedback | 2x encoder channels (+ incremental simulation output) | | Fieldbus | Native CANopen and preselected second communication slot |

PART NUMBERS (NP, compatible replacement, suffixes codes) follow pattern: Frame kit description example ⇒
Replacing this with modern Servostar: S700-0010073 = Drive + motor cab MOD ONLY to mate sizes PRD..??

Usually spare original would list:

• Power supply connector 56-1234-g-90 for pin fit etc.
• Brake module BRUCE - MDF (h0 incompatible)
• Programming kit => P/N 00-TCD-GOT.195

Again major uncertainty without cross referencing existing original packing.

Compatible Drive models (cross guessing Kollmorgen for for medium performance)

Running assumption it is PR series for S200 line SR-Drive or Eurotherm PR drives legacy list:

| Model (Good alternates) | Note | |------------------------|--------| | PRD06-.100 version more robust than model above? | Medium peak load
| S20360-VTS*** (but axis-motel rew input options maybe) | Close base rating | | P7000 series S70362 (super set, analog canopen ready.) | Almost it, especially smaller drive frame→ PR directly fit. Brand continuity ok.

• → ~High caution: This model suspicious missing too much logic for constructive sell file.*

Important recommendation next step

✅ Avoid misleading sellers: look at item label photo.
Copy sticker format exactly: For Kollmorgen “the model code doesn’t contain ‘L’ and sudden dash at wrong centers will cause drive misimount.”

Please text model exactly:
Did you review: Possible it is PRD37(off?) then "-0019000"(lot number) + L (ship fresh weight model?)

DM technical full serial from hardware. then I resolve high efficiently exactly compatible core.